Filter
Top Products
ENGLISH
POWER MANAGEMENT FEATURE
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the
monitor enters into Power Management Mode which reduces the power consumption to less than
5W. The screen becomes dark, and the power indicator turns to orange. From Power Management
Mode, the image reappears in several seconds when either the keyboard or the mouse are
touched again.
The power management feature of this product complies with every power saving requirement of
ENERGY STAR
®
and VESA DPMS. When activated, it automatically reduces unnecessary power
consumption of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a power management step the monitor takes as described below. The power management function,
including any timer settings is configured by the operating system. Check your operating system
manual for information on how this can be configured.
n
0 5 W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
NOTE n In case the strong flicker or blurs remain on a part of the screen, repeat steps
F
and
G
because the Clock may not be adjusted correctly. If the flicker or blurs still remain,
set the refresh rate of computer to low (60Hz) and repeat steps from
C
again.
n Adjust the H-Position after the Phase adjustment if the horizontal position moves
during the adjustment.
H
Adjust the Brightness and Color Temp. to get the desired picture after you complete
the Clock and Phase adjustments.
Put back your favorite wallpaper.
G
Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra
pattern.
or
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
NOTE n
It is possible that the video signal from the computer may be on while the H or V sync signal
is missing. In this instance, the POWER MANAGEMENT feature may not work properly.
n
23 OPERATING THE MONITOR