Filter
Top Products
Page 24
LED Indicators
FRONT LED
(near IR sensor)
PC LED
(back of the monitor)
SOLUTION
Off Off • The monitor is powered off. Press the Power button on the
remote or keypad. If that does not work: 1) verify the power cord
is properly connected to the power outlet and to the monitor; 2)
verify that the power switch on the back of the unit is turned on; 3)
plug another electrical device to the power outlet to verify that the
outlet is supplying the proper voltage.
Off Blinking Green • The monitor is in standby mode. Press the Power button on the
remote or keypad.
White Green • The monitor is powered on.
Orange n/a • Contact InFocus Support at www.infocus.com/support.
For additional troubleshooting support, please contact:
InFocus Corporation - Technical Support
6am-5pm PST
877-388-8385
www.infocus.com/support