Filter
Top Products
11
Insignia 46"/55" 1080p LED TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI 1/DVI jack on the side of your TV.
5 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO IN jack on the side of your
TV and to the AUDIO OUT jacks on the cable or
satellite box.
6 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the Setup Wizard on page 21
.
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT/AV Y/VIDEO, P
B,
and P
R video jacks on the back of your TV and
the component video out jacks on the cable or
satellite box.
4 Connect an audio cable (not provided) to the
L and R audio jacks on the back of your TV and
to the audio out jacks on the cable or satellite TV
box.
5 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the Setup Wizard on page 21
.
Note
You must use the HDMI 1/DVI jack to connect a
cable or satellite box using DVI. If you use another
HDMI jack, you will not hear sound from the TV
speakers.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
Cable or satellite box
HDMI cable with HDMI-DVI adapter
3.5mm audio cable
Side of TV
Note
•The COMPONENT/AV Y/VIDEO, PB, and PR
video jacks (used to connect a component
device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to
connect a composite device).
• When you connect the audio using the L and R
audio jacks, the audio output is analog.
Y / VIDEO
P
B
P
R
L R
Audio cable
Cable or satellite box
Cables are often
color-coded to match
color-coded jacks.
Component video cable
Back of TV