Filter
Top Products
10
www.insignia-products.com
Customizing system settings
To customize the system display and audio
settings:
1 Press MENU on the remote control. The
Operation Menu opens.
2 Press the up or down arrow button to select
one of the following settings, then press the +
and - buttons to change the value:
Using the FM transmitter
To use the FM transmitter for audio:
1 Press MENU. The Operation Menu opens.
2 Press the up or down arrow button to select
FMT Freq, then press the + and - buttons to
change the frequency.
3 Exit the menu.
4 Tune a nearby FM radio (such as your car
stereo or FM radio headphones) to the
frequency you set in Step 2. Audio from the
player is received by the FM radio.
Using the OSD menu
To open the OSD menu:
1 Press SETUP on the remote control. The
main menu opens.
Customizing DVD settings
To set the OSD (on-screen DVD menu)
language:
1 Press SETUP on the remote control. The
DVD setup menu opens.
2 Press the up or down arrow button to select
OSD Menu, then press ENTER. The
language list opens.
3 Press the up or down arrow button to select
the language you want, then press ENTER to
confirm. Languages include English,
French, Spanish, and Italian.
4 Press SETUP to exit the setup menu.
To set the subtitle language:
1 Press SETUP on the remote control. The
DVD setup menu opens.
2 Press the up or down arrow button to select
Subtitle, then press ENTER. The language
list opens.
3 Press the up or down arrow button to select
the language you want, then press ENTER to
confirm. Languages include English,
French, Spanish, Italian, and Off.
4 Press SETUP to exit the setup menu.
Setting Description
Contrast Adjust the contrast.
Brightness Adjust the brightness.
Color Adjust the color.
Tint Adjust the tint.
Wide Screen Selects a display mode:
•Wide (16:9)
•Normal (4:3)
LAC Enable Smooths the display image (Low
angle compensation)
FMT Freq Selects the frequency for the FM
transmitter to transmit audio on:
88.1, 88.3, 88.5, 88.7, 88.9, 89.1,
89.3, 89.5, 89.7, or 89.9 MHz.
RESET Resets the settings to the default
values.
Menu Description
OSD Selects a language for the DVD
player menu. You can select from
the following:
•English
•French
• Spanish
•Italian
Subtitle and
audio language
setting
Available languages depend on the
DVD’s available languages. If you
select a language that’s not
available, the subtitles and the audio
will be in the default language for
the DVD.
TV Display Modifies the display if it does not
match the width to height ratio the
DVD uses. Select from the
following:
•4:3PS
•4:3LB
•16:9
TV Type Selects the television standard the
DVD uses. DVDs sold in the United
States usually are recorded in
NTSC. DVDs sold in Europe and
Asia may use PAL. Select from the
following:
•NTSC
•PAL
Parental Customizes the parental locks to
prevent children from watching
movies with certain ratings.
NOTE: The default password is
3308.
Defaults Resets all settings to the factory
defaults.
NS-M10OHD_FINAL4.fm Page 10 Wednesday, March 29, 2006 4:12 PM