Filter
Top Products
B.CD Changer Emulation
This mode of emulation can be used in all vehicles.
1. iPod Operation
Selecting the Mode
Press the “AUX” or “CD” button to switch to CD Changer mode and access
the Media Gateway. If a factory CD Changer is built into the radio, the AUX or
CD button may need to be pressed twice to access the Media Gateway.
Browsing Playlists
If you wish to access playlists in a certain order they must be labeled as
“PL_1, PL_2, PL_3, PL_4, PL_5 & PL_6”. Otherwise the Media Gateway will
automatically ll Playlist 1 with All Songs and Playlists 2-6 will be the rst 5
playlists in the order they appear on the iPod. If there are no playlists at all on the
iPod it will automatically start playing All Songs after 3 seconds. Discs 7 & 8 are
reserved for manual & auxiliary mode. To access playlists simply use the “DISC
▲” or “DISC ▼” button to select the disc that corresponds with the playlist. If
the radio does not have buttons labeled “DISC ▲” or “DISC ▼” then Preset 5 is
DISC ▼ and Preset 6 is DISC ▲.
Next Track
Press “SEEK ▲” to advance to the next track.
Previous Track
Press “SEEK ▼” to move back to the previous track.
8
4. Selecting AUX Input
Entering Mode Select Menu
Press the “AM-FM” button then press the “XM” button. IMMEDIATELY turn the
rotary TUNE KNOB or press “TUNE ▲” until “AUX” is displayed. The PXAMG will
auto select the mode after 6 seconds of inactivity.
5. Selecting Factory Installed Sat
(if equipped)
Entering Mode Select Menu
Press the “AM-FM” button then press the “XM” button. IMMEDIATELY turn the
rotary TUNE KNOB or press “TUNE ▲” until “SAT” is displayed. The PXAMG will
auto select the mode after 6 seconds of inactivity.
Factory Sat Operation
Refer to the owners’ manual that came with your vehicle.