Filter
Top Products
Controls and operation 2-5
If stations cannot be located for all preset
positions, those that are found will be
allocated positions commencing with
number 1, leaving the remainder not
programmed. The display will show
NO FM or NO AM if unprogrammed
presets are selected.
To switch between the A MEM preset
stations and your own presets, press and
immediately release the AMEMbutton.
A MEM with radio broadcast data
system (RBDS) selected
If the AMEMfunction is operated while
in RBDS mode, the radio will be muted
briefly, while a search is made for the
nine strongest RBDS stations.
Radio broadcast data system (RBDS)
Jaguar sound systems are equipped with
Radio Broadcast Data System (RBDS).
When tuned to certain stations on the
FM waveband, the radio decodes signals
transmitted, to provide the following
functions (dependent upon the service
available).
• RBDS station name display:
When RBDS is selected the station
name is displayed in eight characters.
• RBDS Station/Programme type display
and search:
RBDS displays information on the type
of material broadcast by the station or
programme that is on i.e. News,
Classical, Rock etc. In addition to
this function, the radio can search for
a selected programme type.
• RBDS Priority programme type auto
re-tuning (where broadcast).
RBDS operation
To activate RBDS, press the TA button
and hold for at least two seconds until
RBDS ON is displayed.
To de-activate RBDS, press the TA button
and hold until RBDS OFF is displayed.
With the radio tuned to an RBDS station
and RBDS activated, the radio gathers
RBDS information and displays the
service name/data.
If the radio is not tuned to an RBDS
station, it will remain on that station and
display the frequency, and RBDS will
remain on in readiness for a signal.
When RBDS data is lost the radio will stay
on station, the display shows the
frequency only and RBDS remains on in
readiness for the signal to recover.
If the RBDS function does not respond
correctly, see RBDS trouble-shooting
guide on page 2-7.