Filter
Top Products
Controls and operation 2-7
RBDS trouble-shooting guide
Incorrect response from RBDS Reason and rectification
Radio does not display programme name. Check that RBDS is turned on by pressing and holding the TA button until the
display confirms RBDS ON. If the radio does not display a programme service
name, it is not broadcasting RBDS data, or you are in a poor reception area.
Try re-tuning to another station with RBDS.
Station name is lost and displays frequency only. Radio has lost reception of the RBDS data due to vehicle moving out of
transmitter range, loss of signal in a tunnel, under a garage forecourt canopy, or
similar screening. If the latter is the case, when the vehicle is clear of the
screening, the station name will return after a short delay.
Upon operating AMEM, NO FM is displayed
when most or all of the preset positions are
selected.
The radio cannot locate nine FM or RBDS FM stations dependent upon the mode
selected. If this occurs, switch off RBDS and reselect AMEM.