Jensen CD1211 Car Stereo System User Manual


 
CD1211
10
TUNER OPERATION
AM/FM Band Selector (BAND)
Press BAND (5) during radio play to switch
between three FM bands and one AM band.
“F1”, “F2”, “F3” or “AM” will appear in the
display to indicate the band currently selected.
Tuning
Automatic Tuning
Press the Up Tuning (14) button to tune upward
in frequency and the Down Tuning (13) button
to tune downward in frequency. The unit will
automatically stop at the next strong station. If
the Local mode is active, the radio will seek the
next strong local station when either button is
pressed.
Manual Tuning
Press the Up Tuning (14) or Down Tuning (13)
button for more than two seconds to select
manual tuning mode. “MANUAL” will appear in
the display. Press the Up or Down Tuning
buttons to move radio frequency up or down
two digits at a time. Press and hold the Up or
Down Tuning buttons to quickly advance to a
certain frequency. Release when the desired
frequency is reached. If tuning is not adjusted
within five seconds of entering manual tuning
mode, the radio will revert to automatic tuning
and “AUTO” will appear in the display.
Scan Tuning (SCAN)
Press SCAN (15) to scan upwards through all
the strong channels in the current band. The
unit will pause and play each station for five
seconds, and the station frequency will flash in
the display during this time. Press SCAN again
to stop scanning and listen to the current
station.
NOTE: The Scan function does not work
correctly in “MANUAL” mode.
Preset Stations
Up to six stations on each band can be stored
as presets and can then be instantly recalled by
pressing the associated preset button on the
front panel (16) or remote control. To store a
station, turn the radio on and select the desired
band and station. Press and hold the desired
preset button (numbered one through six on the
face of the radio or remote control) for more
than two seconds. When stored, the preset
number will appear in the display. The station is
now stored and can be recalled at any time by
pressing the corresponding preset button.
/
TUNE
CD1211 CD RECEIVER
SCAN
MONO
EQ
AUX IN
17
20
5
16
18
15
14
13