Filter
Top Products
CD1211
12
CD PLAYER OPERATION
Insert CD
With the label surface facing up, gently insert
the disc into the CD slot (21) until the soft-
loading mechanism engages and pulls the disc
in. Disc play begins, “CDP PLAY” will appear in
the display, and the CD icon will become
animated. The center of the disc icon (7)
illuminates and becomes animated and the
track number and elapsed time appear in the
display.
NOTE: The unit is designed for play of
standard 5” (12 cm.) compact discs only. Do
not attempt to use 3” (8 cm.) CD singles in
this unit, either with or without an adaptor,
as damage to the player and/or the disc may
occur. Such damage will not be covered by
the warranty on this product.
Track Select
Track select features are used to quickly
access the beginning of a particular track when
a disc is in play. Press the Up Tuning button
(14) to move forward or the Down Tuning
button (13) to move backward on the disc to
locate the desired track. Track numbers will
appear in the display as they are accessed.
Press and hold the Up or Down Tuning buttons
to fast forward or fast reverse through a disc.
During either function, the elapsed time will
appear on the display. Release the button to
resume CD play.
Play/Pause
Press the play/pause button (23) to suspend
disc play. “S--PAUSE” will appear in the display,
and the center of the disc icon (7) will stop
rotating. Press the play/pause button again to
resume disc play. The “S--PAUSE” indication
will disappear from the display, and play will
resume from the pausing point.
Disc Scan (SCN)
During disc play, press SCN (24) to play the
first 10 seconds of each track on the disc. “S--
SCN” will appear in the display. When the
desired track is reached, press SCN again to
end the scan function and play the selected
track. “S--SCN” will disappear from the display.
The scan function will also be canceled when
activating the repeat or shuffle functions.
/
TUNE
CD1211 CD RECEIVER
SCAN
MONO
EQ
AUX IN
23
14
13
24 25 26
21 27
7