Filter
Top Products
Extra info
Display of information on the selected station:
–
recall number (if the station was stored),
–
station name (for RDS stations),
–
frequency,
–
program type (PTY, if the station transmits the PTY ID) and
–
the selected sound type for radio mode.
PTY search (only on FM)
This function allows you to search for stations of the desired program type.
☞
Select the desired program type from the list.
☞
Press OK to start the PTY search.
✎
PTY is not supported by all RDS-stations and is not available in all countries.
Radio Setup
☞
Set one of the following functions.
–
Search Level: Setting the search level.
Select “LO” if you want automatic waveband tuning to only search for local stations
(strong signals).
Select “DX” to also search for distant stations.
–
Tuner Grid: Select “EUR” or “USA” depending on which continent you are currently
in.
–
Scan Type: Select “FREQ” if all receivable stations on the current waveband are to be
scanned during station scan. Select “PRST” if only stored stations are to be scanned.
A
If you change the tuner grid, all station memories and the stations in RDS Memo will be
deleted!
Initialization
See “INITIALIZATION” ➽ page 30.
25
RADIO