Jensen MS4200RS Car Stereo System User Manual


 
Connection overview ISO connector B (loudspeakers), Fig. 3:
Pin Wire color Connection to loudspeaker
B1 Blue + Rear right (RR+)
B2 Blue/black – Rear right (RR–)
B3 Grey + Front right (FR+)
B4 Grey/black – Front right (FR–)
B5 Green + Front left (FL+)
B6 Green/black – Front left (FL–)
B7 White + Rear left (RL+)
B8 White/black – Rear left (RL–)
A
Use only 4-ohm impedance speakers.
A
Do not connect either speaker wire to chassis ground.
A Use caution when connecting an aftermarket amplifier to the speaker outputs.
A
Do not connect speakers via an external fader.
Connection overview ISO connector C, Fig. 4 - 6
Yellow connector C1 (Preamp line-out):
An amplifier with additional loudspeakers can be connected to the unit via this connector.
Connect the “FRONT” lead to the front left (white) and front right (red) channel of
the amplifier.
Connect the “REAR” lead to the rear left (white) and rear right (red) channel of the
amplifier.
Connect the blue/yellow lead to the remote control (REMOTE) of the amplifier.
Green connector C2
Telephone input (adapter cable accessories):
Connect the loudspeaker output of the mobile phone or hands-free unit to the yellow
connector at the end of cable C2. For information about setting the telephone attributes,
refer to “INITIALIZATION” Page 30.
Blue connector C3 (CD changer):
You can connect an optional CD changer to the unit. For further information call technical
support.
INSTALLATION INSTRUCTIONS
5