Jensen SD1513 Car Stereo System User Manual


 
SD1513
2
OPERATING INSTRUCTIONS
Power
Press the power button (1) or any other
button on the face of the receiver to turn the
unit on when the ignition switch is on. Press the
power button again to turn the receiver off. If
the radio was left on when the ignition was last
turned off, the receiver will turn on automatically
when the ignition switch is again turned on. If
the receiver was off when the ignition was last
turned off, the receiver must be turned on
manually when restarting the vehicle.
Source
Press the SRC button (2) to select a different
mode of operation as indicated on the display
panel. Available sources include Tuner, CD,
SD, USB, and Auxiliary Input. During CD
player operation, pressing SRC will change to
the tuner source without ejecting the disc. To
access the Auxiliary Input source, press the
SRC button until "AUX" is indicated in the
display.
Volume
To increase the volume, turn the AUDIO
CONTROL (3) clockwise. To decrease the
volume, rotate the AUDIO CONTROL counter
clockwise. When volume is adjusted, the
volume level is shown on the display panel as a
number ranging from “00” (lowest) to “46”
(highest).
SD1513
1
9
10
8
5
16 27
6
4
3
2
14
25
13
17
19
22
20
21
23
24
18
15
11
12
7
LIFT
PS/AS