Filter
Top Products
17
ENGLISH
Selecting the external
component to use—EXT IN
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component – CD changer or external component –
to use.
When shipped from the factory, CD changer is
selected as the external component.
• LINE IN: To use the external component other
than CD changer.
• CHANGER: To use the CD changer.
Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H”, “CLOCK M”, “LEVEL”, “B. SKIP”,
or “EXT IN*
”
appears on the display.
* Displayed only when one of
the following sources is
selected — FM, AM and
Tape.
2
Select “EXT IN” if not shown on the
display.
3
Select the desired mode—“LINE IN” or
“CHANGER.”
4
Finish the setting.
CLOCK H CLOCK M
LEVEL
EXT IN
B. SKIP
LINE IN CHANGER
EN15-18.KS-FX621[U]f 12/12/02, 7:42 PM17