JVC CH-X series Car Stereo System User Manual


 
6
ENGLISH
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
RADIO OPERATIONS
Press ¢ to search
stations of higher
frequencies.
Press 4 to search
stations of lower
frequencies.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold ¢ or 4 until
“M (manual)” starts flashing on the
display.
Selected
band appears.
Selected band appears.
MODE
SCM
11 RP T
12 RN D
109
7
8 MO
FM1 FM2 FM3
AM
Lights up when receiving an
FM stereo broadcast with
sufficient signal strength.
FM1 FM2 FM3
AM
EN06-08-KS-FX621[U]ff 12/12/02, 7:14 PM6