Filter
Top Products
73
ENGLISH
DAB TUNER OPERATIONS
Tuning in to an ensemble and
one of the services
A typical ensemble has 6 or more programmes
(services) broadcast at the same time. After
tuning in to an ensemble, you can select a
service you want to listen to.
1
Select the DAB tuner.
1 Press SRC (source)
repeatedly to select the DAB
tuner.
2 Press and hold SRC. Each
time you press and hold the
button, the DAB band
changes as follows:
Notes:
• This receiver has three DAB bands (DAB1,
DAB2, DAB3). You can use any of them to tune
in to an ensemble.
• When using the remote controller, press and
hold FM (DAB). Each time you press the
button, the DAB tuner and the FM tuner is
selected alternately.
We recommend that you use DAB (Digital Audio
Broadcasting) tuner KT-DB1500 or KT-DB1000
with your unit.
If you have another DAB tuner, consult your JVC
IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied with
your DAB tuner.
What is DAB system?
DAB is one of the digital radio broadcasting
systems available today. It can deliver CD
quality sound without any annoying
interference and signal distortion.
Furthermore, it can carry text, pictures, and
data.
In contrast to FM broadcast, where each
programme is transmitted on its own
frequency, DAB combines several
programmes (called “services”) to form one
“ensemble.”
In addition, each “service”—called “primary
service”—can also be divided into its
components (called “secondary service”).
With the DAB tuner connected with this unit,
you can enjoy these DAB services.
Operations of this section are explained using
the buttons on the control panel unless
mentioned otherwise.
SRC
3456 T/P21
D
SRC
DISP
ATT
SEL
MODE
M
DAB1
DAB2
DAB3
CONTINUED ON THE NEXT PAGE
EN73-77DV5000[E]f.p65 03.3.23, 18:5873