Filter
Top Products
23
ENGLISH
Assigning names to the
sources
You can assign names to station frequencies,
CDs and the external component connected to
the LINE IN plugs. After assigning a name, it will
appear on the display when you select the
source.
Sources Maximum number of the
characters
Station frequencies Up to 12 characters (up to
30 station frequencies
including both FM and AM)
CDs * and Up to 32 characters (up to
CD changer * 40 discs)
External component Up to 12 characters
3
Select the character set you want
while “
” is flashing.
Each time you press the button, the
character set changes as follows:
4
Select a character.
About the available characters, see page
24.
5
Move the cursor to the next (or
previous) character position.
CONTINUED ON NEXT PAGE
When you select a station frequency as the
source:
When you select the external component
connected to LINE IN as the source:
* You cannot assign a name to a CD Text.
1
Select a source you want to assign a
name to.
2
Press and hold SEL (select) for more
than 2 seconds while pressing DISP.
When you select the CD as the source:
Small letter ( )
Capital letter ( )
Numbers and symbols ( )
EN17-24.KD-LX300[J]f 1/5/01, 3:39 PM23