JVC KD-LX300 Car Stereo System User Manual


 
3
ENGLISH
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
LOCATION OF THE BUTTONS............ 4
Control panel ........................................... 4
Remote controller .................................... 5
Preparing the remote controller ................ 6
BASIC OPERATIONS ...................... 7
RADIO BASIC OPERATIONS ............. 8
Listening to the radio ................................ 8
Storing stations in memory ....................... 9
Tuning into a preset station....................... 10
CD OPERATIONS .......................... 11
Playing a CD ............................................ 11
Locating a track or a particular portion
on a CD ................................................. 12
Selecting CD playback modes.................. 12
Prohibiting CD ejection ............................. 13
Playing a CD Text .................................... 13
SOUND ADJUSTMENTS .................. 14
Adjusting the sound ................................. 14
Turning on/off the BBE
II
function .............. 15
Using the sound control memory.............. 15
Storing your own sound adjustments ....... 16
OTHER MAIN FUNCTIONS ............... 17
Setting the clock ...................................... 17
Changing the general settings (PSM) ...... 17
Controlling the volume automatically
(Audio Cruise) ....................................... 21
Assigning names to the sources .............. 23
CD CHANGER OPERATIONS ............. 25
Playing CDs ............................................. 25
Selecting CD playback modes ................. 26
EXTERNAL COMPONENT OPERATIONS ... 28
Playing an external component ................ 28
Using a subwoofer ................................... 28
TROUBLESHOOTING...................... 29
MAINTENANCE ............................ 30
Handling CDs .......................................... 30
SPECIFICATIONS .......................... 31
BEFORE USE
*
For safety....
Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
Stop the car before performing any complicated
operations.
*
Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
About the demonstration mode (DEMO MODE)...
When shipped from the factory, “DEMO MODE” is set to “DEMO ON” in this unit. The
demonstration will start automatically if no sound comes in for 3 minutes. (See page 21.)
To activate the display demonstration manually
While holding DISP, press ¢ until “DEMO” appears on the display.
Various functions and display illumination modes equipped with this unit will be demonstrated repeatedly
in sequence. During the display demonstration, “DEMO” flashes on the display.
To turn off the display demonstration, press ¢ again for a few seconds while holding DISP.
• The display demonstration will turn off automatically after about 1 hour.
EN02-03.KD-LX300[J]f 1/5/01, 3:41 PM3