Filter
Top Products
27
ENGLISH
SOUND ADJUSTMENTS
1
Select the item you want to adjust.
Each time you press the button,
the adjustable items change as
follows:
Indication To do: Range
FADER* Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance. R06 (Right only)
WOOFER
** Adjust the 00 (min.)
subwoofer output |
level. 12 (max.)
VOL ADJ
*** See “To adjust the –12 (min.)
input level of each |
source” on the +12 (max.)
right column
VOLUME Adjust the volume. 00 (min.)
|
50 (max.)
* If you are using a two-speaker system, set the
fader level to “00.”
** This takes effect only when a subwoofer is
connected.
*** Not adjustable when the source is FM. “FIX” will
appear.
2
Adjust the level.
Note:
Normally, the control dial works as the volume
control. So you do not have to select “VOLUME” to
adjust the volume level.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
Reinforcing the bass sound
The richness and fullness of the bass sound is
clearly maintained regardless of how low you set
the volume – Extended Bass.
• You can also adjust the level of Extended Bass.
1
Press E - BASS (EB) (Extended
Bass).
“EX BASS” appears on the
display.
Each time you press the button, Extended Bass
turns on or off alternately.
To decrease the level.
To increase the level.
To adjust the input level of each source.
You can adjust the input level of each source
except FM, and store it in memory.
By adjusting the input level properly to match it
to the FM sound level, you will not need to
adjust the volume level each time you change
the source.
E-BASS
VOLUME
(Volume)
(Subwoofer)
FADER*
(Fader)
BAL
(Balance)
WOOFER**
VOL ADJ***
(Volume adjust)
EN27-29SH909_707[J]f.pm5 17/1/02, 11:32 AM27