Filter
Top Products
ENGLISH
32
2
Turn on the connected component
and start playing the source.
• If connecting a JVC DVD player or VCR,
you can perform the following operations:
When connecting a DVD player:
: Turns on and off the power.
3: Starts playback.
¡: • Fast-forward the track when pressed
and held.
• Skip to the beginning of the next tracks
when pressed briefly.
1: • Reverses the track when pressed and
held.
• Go back to the beginning of the current
track when pressed briefly.
Go back to the beginning of the
previous tracks when pressed
consecutively.
7: Stops playback.
Note:
When you press the above buttons, the display shows
“DVD” and its operation mode (such as 3, 7).
When connecting a VCR:
: Turns on and off the power.
3: Starts playback.
¡: Fast-winds a tape when pressed and
held.
1: Rewinds a tape when pressed and held.
7: Stops playback.
Note:
When you press the above buttons, the display shows
“VCR” and its operation mode (such as 3, 7).
3
Adjust the volume.
4
Adjust the sound you want.
(See page 21.)
To increase the level.
To decrease the level.
EN31-32.KD-SH99[J]f 4/3/01, 2:59 PM32