Filter
Top Products
33
ENGLISH
CD CHANGER OPERATIONS
We recommend that you use one of the CH-X series
with your unit.
If you have another CD automatic changer, consult
your JVC car audio dealer for connections.
• For example, if your CD automatic changer is one of
the KD-MK series, you need a cord (KS-U15K) for
connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your
CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside down,
“NO DISC” will appear on the display. If this
happens, remove the magazine and set the
discs correctly.
• If “RESET 1” – “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the connection
and make sure the cords are connected firmly.
Then, press the reset button of the CD
changer.
Playing CDs
Select the CD automatic changer (CD
CHANGER).
When you select a source,
the power automatically
comes on.
Each time you press the
button, the source changes
as described on page 7.
To fast-forward or reverse the track
Disc number
To go to the next track or the previous tracks
Elapsed playing timeTrack number
Press ¢ briefly, while
playing a disc, to go ahead
to the beginning of the next
track. Each time you press
the button consecutively, the
beginning of the next track is
located and played back.
Press and hold ¢ ,
while playing a disc, to
fast-forward the track.
Press and hold 4,
while playing a disc, to
reverse the track.
Press 4 briefly, while
playing a disc, to go back to
the beginning of the current
track. Each time you press
the button consecutively, the
beginning of the previous
tracks is located and played
back.
EN33-34.KD-SH99[J]f 4/3/01, 2:59 PM33