JVC KV-MR9000 Car Stereo System User Manual


 
15
ENGLISH
SPECIFICATIONS
WIDE COLOR MONITOR
Display:
9 inch Liquid crystal panel
Number of Pixel:
336,960 pixels (480 vertical
×
234
horizontal
×
3)
Drive Method:
TFT (Thin Film Transistor) active matrix
format
Cordless Audio:
Infrared audio transmitter (Support IR
receiver stereo headphones)
L-channel: 2.3 MHz
R-channel: 2.8 MHz
Effective listening angle: 30˚
Effective range: 4 m
Dimensions (W × H × D):
314 mm × 38 mm × 257 mm
including Shroud
Mass: 1.2 kg including Shroud
MONITOR CONNECTION
UNIT
Input
Video: RCA pin × 2 circuits
1 V(p-p), 75
Audio: RCA pin × 2 circuits
0.5 V(rms)
Tuner: 8-pin DIN connector
(only for JVC’s KV-C10)
Output
Display:
13-pin DIN connector
Video: RCA pin × 1 circuit
1 V(p-p), 75
Audio: RCA pin × 1 circuit
0.5 V(rms)
Dimensions (W × H × D):
108.5 mm × 28.5 mm × 78 mm
excluding projections
Mass: 160 g
GENERAL
Power Requirement
Operating Voltage:
DC 14.4 V (11 V to 16 V allowance)
Grounding System:
Negative ground
Allowable Operating Temperature:
0°C to +40°C
Allowable Storage Temperature:
–20°C to +80°C
Ceiling light bulb: 12 V / 3 W
ACCESSORIES
Metal plate × 1
Shroud × 1
Extension cord × 1
Power cord × 1
Ceiling light cord × 1
Remote controller (with the battery) × 1
Screw (M4 × 5 mm) × 4
Screw (M4 × 12 mm) × 4
Design and specifications are subject to change
without notice.
Note:
The liquid crystal panel is built with very high
precision technology and has at least 99.99%
effective image pixels. Be aware that on 0.01%
of the panel there may be missing pixels or
constantly lit pixels.
EN14-15KV-MR9000[E]F.pm6 03.3.13, 12:1215