Filter
Top Products
10
ENGLISH
Other Basic Operations
Activating the door sensor
You can activate or deactivate the door sensor by pressing the Door Sensor button ( ).
When you activate the door sensor, the Door Sensor button glows red if the ignition switch of
the car is turned to “ON” or to “ACC.”
• With the door sensor activated, the ceiling lights go on when a door is open.
Turning on or off the ceiling lights
You can turn on or off the ceiling lights on the monitor by pressing the Ceiling Light button
(
).
Note:
When the Door Sensor button is on, the ceiling lights go off when the door is opened then closed even
if the Ceiling Light button has been turned on.
Selecting the RF signals to the receiver
When you use JVC FM modulator KS-IF200 only:
You can listen to playback sounds from the external component through the receiver even if
it is equipped with no line input.
• Refer also to the instructions of KS-IF200.
When KV-C10 is connected:
Press the RF button on the remote controller.
Each time you press the button, “RF ON” and “RF OFF” alternate and the sounds you hear
through the car speakers change accordingly.
RF ON : Select to listen to the sound of the external component.
RF OFF : Select to listen to the radio (through the receiver).
Using optional cordless headphones
You can use JVC’s optional cordless headphones KS-HP1K to listen to the playback sounds
of the external component.
Playback sounds of the external component are transmitted through this IR transmitter to the
cordless headphones.
Door Sensor button
( )
Ceiling Light button
( )
Ceiling Light
Ceiling Light
IR transmitter
EN08-10KV-MR9000[U]F.pm6 03.3.13, 11:4810