JVC KD-PDR80 Car Stereo System User Manual


 
5OPERATIONS
Basic operations
Using the control panel
9 Volume control [Turn].
Select the source [Press] *
1
.
TUNER *
2
= CD *
2
= USB *
2
(or USB-iPod) *
2
= CD-CH *
2
/iPod *
2
(or EXT IN) =
BT-PHONE *
2
= BT-AUDIO *
2
= AUX IN =
(back to the beginning)
p Select/adjust the sound mode.
Enter the PSM settings [Hold].
q TUNER: Select preset station.
CD/USB/CD-CH: Select folder/track/disc (for
CD changer).
USB-iPod: Select preset top menu items.
BT-PHONE: Dial preset phone number *
3
.
w Enter functions mode.
BT-PHONE: Activate Voice Dialing [Hold].
e Change the display information and pattern.
r TUNER: Select the bands.
USB-iPod: Start/pause playback.
BT-AUDIO: Start/pause playback.
*
1
Holding SOURCE will enter the Bluetooth menu.
*
2
You cannot select these sources if they are not ready
or not connected.
*
3
For storing preset phone number, see page 16.
1 TUNER: Select preset station.
CD/USB/CD-CH: Select folder.
USB-iPod: Enter the main menu [Hold].
iPod: Enter the main menu/Pause playback/
Confirm selection.
BT-PHONE/BT-AUDIO: Select a registered
device.
2 Turn on the power.
Turn off the power [Hold].
Attenuate the sound (if the power is on).
3 Display window
4 USB (Universal Serial Bus) input jack
5 Select the sound mode.
6 Flip down the control panel.
To eject the disc, flip down the control panel
then press
0 on the unit.
7 AUX (auxiliary) input jack
8 TUNER: Search for station.
CD/USB/CD-CH/USB-iPod/iPod: Select track.
BT-AUDIO: Reverse skip/forward skip.
EN02-07_KD-G844[UI]f.indd 5EN02-07_KD-G844[UI]f.indd 5 12/18/07 5:55:41 PM12/18/07 5:55:41 PM