JVC KD-PDR80 Car Stereo System User Manual


 
ENGLISH
21SETTINGS
Selecting a preset sound mode
You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).
Preset value setting for each sound mode
Sound mode
Preset value
Bass Mid (mid-range) Treble
Freq. Level Q Freq. Level Q Freq. Level Q
USER 60 Hz 00 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz 00
ROCK 100 Hz +03 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +02
CLASSIC 80 Hz +01 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz +03
POPS 100 Hz +02 Q1.25 1.0 kHz +01 Q1.25 10.0 kHz +02
HIP HOP 60 Hz +04 Q1.0 1.0 kHz –02 Q1.0 10.0 kHz +01
JAZZ 80 Hz +03 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz +03
Freq.: Frequency Q: Q-slope
2 Adjust the speaker output balance by
pressing:
5 / : between the front and rear
speakers. [F6 to R6]
4 /¢ : between the left and
right speakers. [L6 to R6]
B Subwoofer
1 Press number button 1 ( ) to
move to the “Subwoofer” adjustment
display.
2 Use 4 /¢ to select a cutoff
frequency to the subwoofer.
OFF: All signals are sent to the
subwoofer.
80Hz: Frequencies higher than 80 Hz
are cut off.
120Hz: Frequencies higher than 120 Hz
are cut off.
160Hz: Frequencies higher than 160 Hz
are cut off.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
When
is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
1
2
For “EQ” setting, see page 22.
* Displayed only when “L/O Mode” is set to “Woofer”
(see page 25).
3 Adjust the selected setting item.
A Fad/Bal (Fader/Balance)
1 Press number button 1 ( )
to move to the “Fad/Bal” adjustment
display.
Continued on the next page
EN20-25_KD-G845_001A_f.indd 21EN20-25_KD-G845_001A_f.indd 21 12/11/07 5:19:28 PM12/11/07 5:19:28 PM