JVC KD-PDR80 Car Stereo System User Manual


 
ENGLISH
35REFERENCE
Symptoms Remedies/Causes
USB device
Noise is generated. The track played back is not a playable file format
(MP3/WMA/WAV). Skip to another file.
Do not add the extension code <.mp3>, <.wma>, or
<.wav> to non-MP3/WMA/WAV tracks.
Tracks cannot play back as you have
intended them to play.
Playback order may differs from the one played back
using other players.
“Reading” keeps flashing on the display. Readout time varies depending on the USB device.
Do not use too many hierarchy, folders and empty
folders.*
Turn off the power then on again.
Do not pull out or connect the USB device repeatedly
while “Reading” is displayed on the display.
* Folder that is phisically empty or folder that contains
data but does not contain valid MP3/WMA/WAV track.
“No File” flashes on the display.
“No USB” appears on the display.
Connect a USB device that contains tracks encoded in an
appropriate format.
“Not Support” appears on the display and
track skips.
The track is unplayable.
“Read Failed” or “Cannot Play” appears on
the display, then returns to the previous
source.
The connected USB device may be malfunctioning,
or may not have been formatted correctly. The files
included in the USB device are corrupted.
Correct characters are not displayed (e.g.
album name).
For available characters, see page 33.
While playing a track, sound is sometimes
interrupted.
The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
The sound is interrupted or skipped during
playback of a USB device.
Turn off, then turn on the unit.
Connect the device again, when the sound is not yet
restored.
Continued on the next page
EN32-39_KD-G845_001A_3.indd 35EN32-39_KD-G845_001A_3.indd 35 12/1/07 11:01:06 AM12/1/07 11:01:06 AM