JVC KD-PDR80 Car Stereo System User Manual


 
ENGLISH
41REFERENCES
Continued on the next page
Symptoms Remedies/Causes
Bluetooth ®
Bluetooth device does not detect the unit. The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
The unit does not detect the Bluetooth
device.
Check the Bluetooth setting of the device.
Search from the Bluetooth device. After the device
detects the unit, select “Open...” on the unit to connect
the device. (See page 14.)
The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device.
Select the device name from “Special,” then try to
connect again. (See page 15.)
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth cellular phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped during
playback of a Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for “BT-PHONE.”
Turn off, then turn on the unit.
Connect the player again, when the sound is not yet
restored.
The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)
CD changer
“No Disc” appears on the display. Insert a disc into the magazine.
“No Magazine” appears on the display. Insert the magazine.
“Reset 08” appears on the display. Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
“Reset 01” – “Reset 07” appears on the
display.
Press the reset button of the CD changer.
The CD changer does not work at all. Reset the unit (see page 3).
EN38-45_PDR61_003A_5.indd 41EN38-45_PDR61_003A_5.indd 41 1/3/08 5:31:19 PM1/3/08 5:31:19 PM