Filter
Top Products
15
ENGLISH
TAPE OPERATIONS
BAND
S
S
M
SOURCE
TP
RDS
MODE
ATT
PTY
DISP
INTLOCALMONOSCM
10789 11 12
RPT RND
OFFSEL
R
/
0
Listening to a tape
1
Open the cassette compartment.
2
Insert a cassette into the cassette
compartment.
The unit draws the cassette,
and tape play starts
automatically after the
display panel moves up.
Notes:
• When a cassette is already in the cassette
compartment, select tape as the source by
pressing SOURCE (23) to start tape play.
• When one side of the tape reaches its end during
play, the other side of the tape automatically
starts playing. (Auto Reverse)
3
Select the tape direction.
Each time you press and hold
SOURCE (23), the tape
direction changes alternately
forward ( ) and
reverse ( ).
ON
CLOSE
“Cassette in” indicator appears.
0
To stop play and eject the cassette
Press 0 OFF briefly.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The source
changes to the previously selected one.
If you change the source, the tape play also stops
(without ejecting the cassette this time).
• You can eject the cassette while the ignition key
is turned off by pressing ¢ or 4 .
To close the display panel, press ¢ or
4 .
• Turning on or off the ignition key does not close
the display panel. To close it, press ¢
or 4 .
CAUTION
NEVER insert your finger
between the display panel
and the unit, as it may get
caught in the unit.
To fast-forward and rewind a tape
To stop fast forward and rewind at any position
on the tape, press and hold SOURCE (23).
Tape play starts from that position on the tape.
Note:
When the tape reaches its end while fast-forwarding, the
tape direction will be changed automatically.
Press 4 for more than 1
second to rewind the tape.
When the tape reaches its end,
playback of the same side starts.
Press ¢ for more than 1
second to fast-forward the tape.
When the tape reaches its end, the
tape is reversed and playback
starts from the beginning of the
other side.
ON
CLOSE
EN15-17.KS-LX200R[E]f 8/30/00, 10:08 AM15