Filter
Top Products
7
ENGLISH
Listening to the radio
You can use either automatic searching or manual
searching to tune into a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1–3, AM).
• Press and hold SOURCE (BAND)
repeatedly to select the FM band (FM1,
FM2 or FM3.)
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching
stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.
RADIO BASIC OPERATIONS
To tune in FM stations only with strong signals
1 Press MODE ATT.
“MODE” appears on the display, and the number
buttons can work as different function buttons.
2 Press LOCAL, while “MODE” is still on the display,
so that the LOCAL indicator lights up on the
display.
This function works only while searching FM
stations, including SSM preset (see page 8).
Each time you press the button, the LOCAL
indicator lights up and goes off alternately.
BAND
S
S
M
SOURCE
TP
RDS
MODE
ATT
PTY
DISP
INTLOCALMONOSCM
10789 11 12
RPT RND
OFFSEL
R
/
0
Searching a station manually:
Manual search
1
Select the band (FM1–3, AM).
• Press and hold SOURCE (BAND)
repeatedly to select the FM band (FM1,
FM2 or FM3.)
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold ¢ or 4 until
“MANU” (manual) starts flashing on
the display.
Selected band appears
Press ¢ to search
stations of higher frequencies.
Press 4 to search
stations of lower frequencies.
CONTINUED ON THE NEXT PAGE
EN06-09.KS-LX200R[E]f 8/30/00, 10:05 AM7