Filter
Top Products
20
ENGLISH
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
below.
• To adjust the bass and treble reinforcement levels or
to turn on/off the BBE
II
function temporarily, see pages
18 and 19. (Your adjustments will be canceled if
another source is selected.)
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press MODE ATT.
The number buttons can work as
different function buttons.
2
Select the sound mode you want.
For details, see page 19.
3
Select the item you want to adjust
(BAS, TRE, or BBE
II
).
4
Adjust the selected item.
5
Repeat steps 3 and 4 to adjust the
other items.
6
Press and hold SCM until the sound
mode you have selected flashes on the
display.
Your adjustment made for the
selected sound mode is stored in
memory.
7
Repeat the same procedure to adjust
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset
values listed in the table on the left column.
Indication For: Preset values
Bass Treble BBE
II
BEAT Rock or disco +02 00 2
music
SOFT Quiet +01 –03 OFF
background
music
POP Light music +04 +01 OFF
SCM OFF (Flat sound) 00 00 2
EN18-20.KS-LX200R[E]f 8/30/00, 10:08 AM20