Filter
Top Products
24
Dimming Control: Press CHANNEL 5 / ∞ (or CH
+ / –) to select either “Manual” or “Automatic”, then
press SELECT.
• Manual: A horizontal bar graph is displayed. Press
CATEGORY # / @ (or CAT + / –) to adjust the
display brightness manually, then press SELECT.
(You can also use CHANNEL 5 / ∞ (or CH + / –)
for adjustment.)
• Automatic: The low dimming limit “L” and high
dimming limit “H” will always maintain a
minimum separation of the settings.
– Adjust the low dimming limit “L” and high
dimming limit “H” using CATEGORY # / @ (or
CAT + / –).
– Toggle between “L” and “H” using CHANNEL
5 / ∞ (or CH + / –).
– Confirm all settings using SELECT.
Font Type: Press CHANNEL 5 / ∞ (or CH + / –) to
select the font type shown on the display, then press
SELECT.
3 Confirmation Tone Options
Press CHANNEL 5 / ∞ (or CH + / –) to select either
“On” or “Off”, then press SELECT.
• On: To activate the confirmation beep when you
press
(POWER) or some operation buttons.
• Off: To deactivate the confirmation beep.
4 FM Transmitter Options
This option functions only when your JVC PnP is
connected to the Car Docking Kit KS-K6002.
Press CHANNEL 5 / ∞ (or CH + / –) to select either
“On” or “Off”, then press SELECT.
• FM On: To activate the FM transmitter.
• FM Off: To deactivate the FM transmitter.
Note: It is recommended that you select “FM Off”
if you have connected your JVC PnP using a
audio cord or cassette adapter.
5 Add or Skip
You can skip unwanted streams while tuning.
Upon entering this mode, a stream list appears with
the currently playing stream highlighted.