Filter
Top Products
29
Alarm Clock
You can set your JVC PnP to turn on at a specific
time.
The last selected stream prior to shutdown will be
played when the Alarm turns on your JVC PnP.
Set Alarm:
Press CHANNEL 5 / ∞ (or CH + / –) to select either
“Alarm On” or “Alarm Off (default)”, then press
SELECT.
Alarm Time (default—12:00pm):
Press CATEGORY # / @ (or CAT + / –) to set the
hour, press CHANNEL 5 / ∞ (or CH + / –) to set the
minute, then press SELECT.
AM or PM will switch automatically as you advance
the time.
Note: If your JVC PnP cannot receive the SIRIUS
signals (satellite and terrestrial) correctly when the
alarm time comes, you may hear a series of alarm
tones.
Program Alert
You can program your JVC PnP to switch to a
specified stream at a specified time.
• To use your programmed setting, make sure to
set “Program Alert” to “Program Alert On”.
The following settings are possible on this sub-menu
screen—
• Time/Day (default—12:00pm/Monday)
• Stream (default—Currently Playing Stream)
• Program Alert (default—Off)
Time/Day:
Press CHANNEL 5 / ∞ (or CH + / –) to select either
“Time” or “Day”, then press SELECT.
• Time: To set the time.
Press CATEGORY # / @ (or CAT + / –) to set the
hour, then press CHANNEL 5 / ∞ (or CH + / –) to
set the minute, then press SELECT.
AM or PM will switch automatically as you
advance the time.
• Day: To set the day.
Press CATEGORY # / @ (or CAT + / –) to select
the day—Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday or Sunday, then press SELECT.
Make sure to set both “Time” and “Day” correctly.