JVC KT-SR1000 Car Satellite Radio System User Manual


 
8
Finding the Best Antenna Mounting
Location
1
Temporarily plug the antenna into the back of
the cradle—SAT (MAIN) until it is firmly
seated.
2
Find an antenna location on a metal surface of
your car—at least 30 cm × 30 cm (12 inches ×
12 inches), and at least 15 cm (6 inches) from a
window.
The antenna’s powerful magnet will secure it to
the metal surface.
Best reception is achieved with the antenna
mounted on the roof or trunk for convertibles.
If your car has a roof rack or skid ribs, it may be
necessary to mount the antenna off-center.
3
Temporarily plug the cigarette lighter adapter
into the cigarette lighter.
4
For KS-K6001:
A If your car stereo does not have a line input
(LINE IN or AUX)...
Plug the cassette adapter into the back of
the cradle—AUDIO OUT.
B If your car stereo has a line input (LINE IN
or AUX)...
Plug the supplied audio cable into the back
of the cradle—AUDIO OUT.
Plug the audio cable’s white (L ch) and red
(R ch) connectors into your car stereo.
For KS-K6002:
Activate the FM signal transmitter (see
page 24), and set the FM frequency output
selector to select one of the following
frequencies—88.1 MHz, 88.3 MHz,
88.5 MHz, and 88.7 MHz.
It is recommended to preset the frequency
selected by the FM frequency output
selector into your car stereo so you can
easily tune in to the frequency.
Installation in Your Car with KS-K6002/KS-K6001 (continued)