Filter
Top Products
67
REFERENCES
ENGLISH
Symptoms Remedies/Causes
Satellite radio
• “CALL 1-888-539-SIRIUS TO SUBSCRIBE”
appears on the monitor.
Starts subscribing SIRIUS Satellite radio. (☞ page 36)
• “No Signal” or “NO SIGNAL” appears on the
monitor.
Move to an area with stronger signals.
• “No Antenna” or “ANTENNA” appears on the
monitor.
Connect the antenna firmly.
• “No CH” appears on the monitor for about 5
seconds, then returns to the previous display
when listening to the SIRIUS Satellite radio.
No broadcast on the selected channel.
Select another channel or continue listening to the previous
channel.
• “CH–––” appears on the display for about
2 seconds, then returns to the previous
channel while listening to the XM Satellite
radio.
Selected channel is no longer available or is unauthorized.
Select another channel or continue listening to the previous
channel.
• “NO NAME” appears on the monitor. No text information for the selected channel.
• “UPDATING” appears on the monitor and no
sound can be heard.
The receiver is updating the channel information and it
takes a few minutes to complete.
• “OFF AIR” appears on the monitor while
listening to the XM Satellite radio.
Selected channel is not broadcasting at this time. Select
another channel or continue listening to the previous
channel.
• “LOADING” appears on the monitor while
listening to the XM Satellite radio.
The unit is loading the channel information and audio. Text
information is temporarily unavailable.
• “Reset08” flashes on the monitor. Reconnect this unit and the Satellite radio correctly and
reset the unit.
• Satellite radio does not work at all. Reconnect the Satellite radio after a few seconds.
iPod
• The iPod does not turn on or does not work. • Check the connection.
• Charge the battery.
• Sound is distorted. Deactivate the equalizer either on this unit or the iPod.
• “Disconnect” appears on the screen. Check the connection.
• Playback stops. The headphones are disconnected during playback. Restart
playback.
• “No Files” appears on the screen. No tracks are stored. Import tracks to the iPod.
• “Reset 01” – “Reset 07” appears on the
screen.
Disconnect the adapter from both this unit and iPod. Then,
connect them again.
• “Reset 08” appears on the screen. Check the connection between the adapter and this unit.
• The iPod’s controls do not work after
disconnecting from this unit.
Reset the iPod.
AV-IN
• No picture appears on the screen. • Turn on the video component if it is not on.
• Connect the video component correctly.
• Playback picture is not clear and legible.
Adjust items in <Picture Adjust> menu. (☞ page 48)
EN_KW-AVX710[J].indb 67EN_KW-AVX710[J].indb 67 07.12.5 11:59:36 AM07.12.5 11:59:36 AM