Filter
Top Products
15
ENGLISH
Operating a VCD with menus
(PBC: Playback Control)
This operation is possible only with the
remote controller.
The Playback Control function (PBC) allows you
to operate the VCD using menus.
1
Press PBC while playing back a
VCD.
Once the VCD playback stops
and a menu will automatically
appear on the screen.
• A menu may be a list of items, divided
screens, or some moving pictures. (See
“PBC operation concept” to the right.)
Notes:
• The elapsed playing time and the track number
do not appear while the PBC function is
activated (“PBC” is shown on the display).
• You cannot activate PBC while playing back a
VCD in random or repeat mode. Turn off the
random or repeat mode before pressing PBC.
2
Use the number buttons to select
the item or submenu you want, then
press ENTER.
• Repeat this step to select an item from
submenus.
The playback of the selected item starts
automatically.
PBC indicator lights up.
How to select items using the number
buttons
•To select number 5, press 5, then ENTER.
•To select number 10, press 1, 0, then ENTER.
•To select number 23, press 2, 3, then ENTER.
To return to the previous menu
Press RETURN .
To cancel a mis-entry
• Before pressing ENTER, press the correct
number, then ENTER.
• After pressing ENTER, press RETURN and
select the correct item on the menu.
To stop the PBC playback
Press PBC again.
• Each time you press PBC, the function turns
on and off alternately.
Notes:
• The PBC function is not available for some VCDs,
even if “VCD 2.0” appears on the monitor when
loading.
• The PBC function is automatically canceled when
you change the source or turn off the unit.
Playback starts from the beginning of the disc when
you play the VCD again.
• DISP (display) button (see page 8) does not work
when you use the PBC function.
PBC
123
456
789
0
ENTER
PBC operation concept
On the monitor, when you select 23 for
example, “SELECT 23” appears.
EN12_16KD_SV3000[U].p65 03.4.17, 2:58 PM15