Filter
Top Products
19
ENGLISH
Playing an MP3 disc
Insert an MP3 disc into the loading slot.
The unit turns on, draws
the MP3 disc and starts
playback automatically.
The CD–in indicator flashes.
The CD–in indicator lights up.
Total file numberTotal folder number
MP3 indicator lights up.
All files will be played repeatedly until you stop
playback.
Notes:
• When a disc is already in the loading slot, pressing
CD turns on the unit and starts playback
automatically.
• MP3 discs require a longer readout time.
• When playback starts, disc information will
automatically appear. (See also the next column.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select “CD” as the source, disc play
starts from the beginning of the file which was
playing previously.
To stop playback temporarily
Press 6.
Playback pauses and “PAUSE” flashes on the
display.
To resume playback, press 6 again.
To stop play and eject the disc
Press 0.
Playback stops and the disc automatically ejects
from the loading slot.
To change the display information
While playing back an MP3 file,
you can change the disc
information shown on the display.
Each time you press DISP
(display), the display changes to
show the following:
Note:
The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 24.
Folder name
File name
Elapsed playing time and
Current file number
Clock and
Current file number
To check the information of an MP3 disc
on the monitor
Turn on the monitor while playing back an
MP3 disc.
The information appears automatically as
follows:
• This unit can show a maximum of 239 files.
Current file
Current folder name
Ex.: When the disc contains 19 folders and
144 MP3 files
EN17_21KD_SV3000[U].p65 03.4.17, 2:59 PM19