Filter
Top Products
5
1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
• Each time you press CD/
CD-CH, the source alternates
between CD* and CD-
changer**.
• Each time you press FM/AM, the
band changes to FM (FM1,
FM2, FM3) and AM.
• Press TAPE (PROG), so that the
source is selected as TAPE***.
* If a disc is not in the loading slot, you cannot
select CD as the source to play. (“NO DISC” will
appear on the display.)
** Without connecting the CD changer, you cannot
select it as the source to play.
*** If a cassette is not in the cassette compartment,
you cannot select TAPE as the source to play.
(“NO TAPE” will appear on the display.)
To operate the tuner, see pages 6 – 8.
To play the CD, see pages 9 and 10.
To operate the tape deck, see pages 11 – 13.
To operate the CD changer, see pages 15 – 18.
3
Adjust the volume.
4
Adjust the sound as you want
(see page 14).
To drop the volume immediately
Press
ATT
/
briefly while listening to any
source. The ATT indicator starts flashing on the
display, and the volume level will drop
immediately.
To resume the previous volume level, press
the button briefly again.
To turn off the power
Press
ATT
/
for more than 1 second.
• If you turn off the power while listening to a
CD, the CD play will start from where playback
has been stopped previously, next time you
turn on the power.
• If you turn off the ignition key without
turning off this unit, the unit will
automatically turn on when you turn on the
ignition key next time. If the last selected
source is ready for playback (ex. a CD or a
tape is in the unit), playback starts
automatically.
BASIC OPERATIONS
To increase the volume
To decrease the volume
Volume level
ENGLISH