Filter
Top Products
6
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching for a station automatically:
Auto search
1
Select the band (FM1, FM2, FM3 or
AM).
Note:
This receiver has three FM bands (FM1, FM2,
and FM3). You can use any one of them to listen
to an FM broadcast.
2
Start searching for a station.
To search for stations of higher
frequencies, press ¢
briefly.
To search for stations of lower
frequencies, press 4
briefly.
When a station is received, searching stops.
ST indicator lights up when receiving an FM
broadcast in stereo.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching for a station manually:
Manual search
1
Select the band (FM1, FM2, FM3, or
AM).
2
Press and hold ¢ or 4
until “M” (manual) starts flashing on
the display.
3
Tune in to a station you want while
“M” is flashing.
To tune in to stations of higher
frequencies
To tune in to stations of lower
frequencies
Selected band appears.
ENGLISH