JVC LVT2088-001B Car Stereo System User Manual


 
ENGLISH
13
EXTERNAL DEVICES
For Bluetooth operations, it is required to connect the
Bluetooth adapter (KS-BTA200) (not supplied) to the
expansion port on the rear of this unit.
Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
See the last two pages to check the countries where
you may use the Bluetooth ® function.
To check the latest information, visit the following
JVC web site: <http://www.jvc.co.jp/english/car/>
(English website only)
To use a Bluetooth device through the unit (“BT PHONE”
and “BT AUDIO”) for the first time, you need to establish
Bluetooth wireless connection between the unit and
the device.
Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
Only one device can be connected at a time for each
source (“BT PHONE” and “BT AUDIO”).
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
Select “BT PHONE” or “BT AUDIO” as the source to
operate the Bluetooth menu.
OPEN Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
SEARCH Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.
Using the Bluetooth ® devices
See page 26 about warning messages for Bluetooth
operations.
Registering using “OPEN”
Preparation: Operate the device to turn on its
Bluetooth function.
1 Select “BT PHONE” or “BT AUDIO.”
2 Select “NEW DEVICE.”
3 Select “OPEN.”
4 Enter a PIN (Personal Identification Number)
code to the unit.
You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
– Some devices have their own PIN code. Enter
the specified PIN code to the unit.
1 Move to the next (or previous) number
position.
2 Select a number.
3 Repeat steps 1 and 2 until you finish
entering a PIN code.
4 Confirm the entry.
“OPEN..” flashes on the display.
[Turn]
Continued on the next page
KD-HDR40[J].indb 13KD-HDR40[J].indb 13 09.11.10 3:41:16 PM09.11.10 3:41:16 PM