JVC LVT2088-001B Car Stereo System User Manual


 
ENGLISH
29REFERENCES
Symptoms Remedies/Causes
Bluetooth *
2
The unit does not detect the Bluetooth
device.
Check the Bluetooth setting of the device.
Search from the Bluetooth device. After the device
detects the unit, select “OPEN” on the unit to connect
the device. (See page 13.)
The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code both for the unit and target
device.
Select the device name from “SPECIAL,” then try to
connect again. (See page 14.)
Try to pair/connect from the Bluetooth device.
Echo or noise occurs. Adjust the microphone unit position.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth mobile phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped during
playback of a Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for “BT PHONE.”
Turn off, then turn on the unit.
(When the sound is not yet restored,) connect the
device again.
The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
KD-HDR40[J].indb 29KD-HDR40[J].indb 29 09.11.10 3:41:31 PM09.11.10 3:41:31 PM