Kenwood DDX3071BT Car Video System User Manual


 
26
SiriusXM® R ADIO (Only for DDX771/DDX491HD/DDX471HD/DDX371/DDX310BT/DDX271)
Everything worth listening to is on SiriusXM, getting
over 130 channels, including the most commercial-
free music, plus the best sports, news, talk and
entertainment. To start listening to the SiriusXM®
Satellite Radio, a SiriusXM Connect Vehicle Tuner
(commercially available) and subscription are
required. For more information, visit www.siriusxm.
com.
Activating subscription
1 Check your Radio ID.
Radio ID is labeled on the casing of the SiriusXM
Connect Vehicle Tuner or the bottom of the
SiriusXM Connect Vehicle Tuner unit.
You can also display the Radio ID on the
screen by tuning in to Channel 0.
2 Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods
below:
For users in U.S.A:
Online: Go to www.siriusxm.com/
activatenow
Phone: Call 1-866-635-2349
For users in Canada:
Online: Go to www.xmradio.ca and click on
“ACTIVATE RADIO” in the top right corner
Phone: Call 1-877-438-9677
3 When the following screen appears, press
[Enter].
Listening to the SiriusXM® Radio
Only for DDX271
Preparation: Select <SXi> for <External BUS>
while [STANDBY] is selected on <Top Menu> so
that <SXi> is selectable as the source on <Top
Menu>. (Page 47)
Indications and buttons on the source
control screen
1
2
4
3
56
SiriusXM® radio reception information
1 Band
2 Radio ID (or Preset number if the current station
is preset)
The Radio ID is displayed when the channel is
set to 0.
3 Channel number
4 Seek mode
5 Signal strength indicator
6 Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
Operation b uttons
[P1] – [P6] Selects a stored channel. (Press)
Stores the current channel. (Hold)
[Song Title]
[Content
Info]
[Category]
Changes the displayed information
each time this button is pressed.
[MODE] Changes the settings for restrictions
on the <SiriusXM Mode> screen.
(Page29)
[DIRECT] Displays the <Direct Channel
Select> screen. (Page27)
[TEXT] Displays/hides the information of the
current channel. (Page27)
[REPLAY] Displays the <Replay> screen.
(Page28)
[
]
Obtain information on channels or
select a category and then a channel.
(Page28)
[BAND] Selects the band.
[SEEK] Changes the seek mode.
SEEK1: Skip to another available
channel.
SEEK2: Skip to another preset
channel.
[ ] [ ]
Seeks forward or backward (refer to
the above for the seek mode).
[MENU] Displays the <Top Menu> screen.