Kenwood DDX3071BT Car Video System User Manual


 
ENGLISH 49
REMOTE C ONTROLLER
Overview
DDX3071BT/DDX2071:
This unit can be operated using the Remote
Controller (RC-DV340) supplied with this unit.
DDX771/DDX491HD/DDX471HD/DDX371/
DDX310BT/DDX271:
Optional Remote Controller KNA-RCDV331 is
designed for controlling this unit. Refer to the
instruction manual that comes with the remote
controller.
V Caution:
Put the Remote Controller in a place where it will
not move during braking or other operations. A
dangerous situation could result if the Remote
Controller falls down and gets wedged under the
pedals while driving.
Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
Do not recharge, short, break up or heat the
battery or place it in an open fire. Such actions
may cause the battery to leak fluid. If spilled fluid
comes in contact with your eyes or on clothing,
immediately rinse with water and consult a
physician.
Place the battery out of reach of children. In the
unlikely event that a child swallows the battery,
immediately consult a physician.
Battery installation
Use two “AAA”/”R03”-size batteries.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
If the Remote Controller operates only over
shorter distances or does not operate at all, it is
possible that the batteries are depleted. In such
instances, replace both batteries with new ones.
Remote Controller mode switch
The functions operated from the remote controller
differ depending on the position of the mode switch.
DVD
t
TV
t
AUD
t
AUD mode: Switch to this mode when controlling a
selected source or tuner source, etc.
DVD mode: Switch to this mode when playing DVDs
or CDs etc. with the player integrated in this unit.
TV mode: Not used.
The position of the remote control mode switch
is indicated in the title of each mode, e.g., “(AUD
mode)”.
When controlling a player that is not integrated in
the unit, select “AUD” mode.