Kenwood DDX5035BT Car Video System User Manual


 
22
TUNER
Listening to the radio
Indications and buttons on the source
control screen
12 3
465 789
p
q
Tuner reception information
1 Band
2 Preset no.
3 The station frequency currently tuned in
4 ST/MONO indicator
The ST indicator lights up when receiving an
FM stereo broadcast with sufficient signal
strength.
5 AF indicator
6 Seek mode
7 LO.S indicator (Page23)
8 RDS indicator
9 EON indicator: Lights up when a Radio Data
System station is sending EON signals.
p Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
q Standby reception indicators
Operation buttons
[P1] – [P6] Selects a stored station. (Press)
Stores the current station. (Hold)
[MODE] Changes the settings for tuner
reception on the <Tuner Mode>
screen. (Page23)
[TI] Activates/deactivates TI standby
reception mode. (Page24)
[AME] Presets stations automatically.
(Page23)
[MONO]* Activates/deactivates monaural
mode for better FM reception.
(Stereo effect will be lost.)
The MONO indicator lights up
while monaural mode is activated.
[
]
Changes the display information.
(See the right column.)
[ ]
Displays the easy control screen.
(Page8)
[PTY]* Enters PTY search mode. (Page24)
[AM] Selects the AM band.
[FM] Selects the FM band.
[SEEK] Changes the seek mode.
AUTO1: Auto Search
AUTO2: Tunes in the stations in
the memory one after another.
MANU: Manual Search
[S] [T]
Searches for a station.
The search method differs
according to the selected seek
mode. (See above.)
[MENU] Displays the <TOP MENU> screen.
* Appears only when FM is selected as the source.
Changing the display information
The preset list and the station name for FM Radio
Data System (when PS signal is coming in) are
displayed.
• Pressing [
] again displays the text information
for the station currently being received.