Filter
Top Products
ENGLISH 45
SETTINGS
smeti unem gnitteS
❏Displaying the <Setup> menu screen
• You can change the page to display more items by
pressing [J]/[K].
• You cannot change the <Audio> settings
screen when [STANDBY] is selected on the
<TOP MENU>.
❏<Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
• F6 to R6 (Initial: 0)
– When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
• L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [
] to adjust.
– To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
• Natural (Initial)/Rock/Pops/Easy/Top40/Jazz/
iPod*
1
/Powerful/User
<Loudness>
You can activate/deactivate loudness.
• ON (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level.
• OFF: Cancels.
<Volume Oset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/DVD-VR/
VCD, CD, and DivX/MPEG1/MPEG2/H.264/WMV/
MP3/WMA/WAV/AAC/FLAC.) The volume level
will automatically increase or decrease when you
change the source.
• –15 to +6 (Initial: 0)
>leveL WS<
Adjust the subwoofer level.
• –50 to +10 (Initial: 0)
<Car Setting>
• Car type: O (initial)/Compact/Full Size Car/
Wagon/Minivan/SUV/Minivan (Long)
• Speaker Location: Select the location of the
speaker on your car.
– Front Speaker: Door (initial)/On Dash/Under
Dash
– Rear Speaker*
2
: Door/ Rear Deck/2nd Row
3rd Row
<Speaker Select>
Select the speaker size and adjust the crossover
<Position>
Adjust the sound eects according to your listening
<DSP Select>
Select whether to use the Digital Signal Processor
(DSP) system.
• Bypass: Invalidates all the settings for the DSP.
• Through (Initial): Uses the DSP.
<Drive Equalizer>
You can reduce the driving noise by raising the
bandwidth.
• ON: Activates the Drive EQ.
• OFF (Initial): Cancels.
*
1
Appears only when iPod is selected as the source.
*
2
The initial setting varies depending on the car type setting.