Kenwood DDX5035BTM Car Video System User Manual


 
ENGLISH 31
BLUETOOTH
Pairing a Bluetooth device from this unit using a
PIN code (for Bluetooth 2.0)
1 Display the <Bluetooth Setup> screen.
(Page30)
2
3 Search for the available devices.
To cancel searching devices, press [Cancel].
4 Select the device you want to pair.
A confirmation message appears. Press [Pair].
Connecting/disconnecting a registered
Bluetooth device
Two devices can be connected simultaneously.
1 Display the <Bluetooth Setup> screen.
(Page30)
2
3 Select the device you want to connect (1),
then press [Connection] (2).
4 Select [ON] or [OFF] for the target.
:
Mobile phone
:
Audio device
The status is shown as follows:
“Connected”: A connection has been
established.
“Connect Ready”: A connection can be
established.
“Disconnected”: No connection is
established.
Deleting a registered Bluetooth device
1 Display the <Bluetooth Setup> screen.
(Page30)
2
3 Select a device to delete (1), then press
[Remove] (2).
A confirmation message appears. Press [Yes].