Kenwood DDX5035BTM Car Video System User Manual


 
44
SETTINGS
Locking the settings
You can lock the settings to prevent them from
being changed.
is shown beside the settings that can be
locked.
1 Display the <SETUP Memory> screen.
(Page43)
2
To unlock the setting: Press [Unlock].
Updating the system
You can update the system by connecting a USB
device containing an update file.
To update the system, visit <http://www2.
jvckenwood.com/cs/ce/>.
1 Create an update file, copy it to a USB
device, and connect it to the unit.
To connect a USB device, see page 56 .
2 Display the <System Information>
screen.
On the <TOP MENU> screen:
Press [K] repeatedly to change the page on
the <System> menu screen.
3
<Application
Version>
Updates the system
application.
<System
Version>
Updates the system.
<Bluetooth
Version>
Updates the Bluetooth
application.
It may take a while.
If the update has been completed successfully,
“Update Completed” appears. Reset the unit.
If the update has failed, turn the power off and
then on, and retry the update.
Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
Adjusting the touch position
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1 Display the <Setup> setting screen. (See
the far left column.)
2 Display the <Touch Panel Adjust> screen.
Press [K] repeatedly to change the page on
the <System> menu screen.
3 Touch the center of the marks at the lower
left and at the upper right as instructed.
To reset the touch position, press [Reset].
To cancel the current operation, press
[Cancel].