Filter
Top Products
34
|
KDC-BT51U/ KDC-5751SD/ KDC-5051U
Operation of hands-free phoning
Before use
KDC-BT51U
• If your cell-phone is not yet registered, register (pair)
it by referring to <Registering cell-phone> (page 9)
in the Quick Start Guide or <Registering cell-phone>
(page 34) in this document.
• To register a new cell-phone, you can also refer to
<Registering cell-phone> (page 34).
KDC-5751SD/ KDC-5051U
• If your cell-phone is not yet registered, register (pair)
it by referring to <Registering cell-phone> (page 9)
in the Quick Start Guide or <Registering Bluetooth
device> (page 44) in this document.
⁄
• For details on the Bluetooth cell-phone with the
hands-free function, see <About the Cell-phone>
(page 53).
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory)
Function of KDC-BT51U
Registering cell-phone
Enter Bluetooth mode
Press the [ ] button for at least 1 second.
If your cell-phone is not yet registered, the search
for a cell-phone starts with “Searching” displayed.
Paring with new cell-phone
Turn the Control knob to select “Device Search”,
and then press the Control knob.
The search for a cell-phone starts with “Searching”
displayed.
Select the used cell-phone
Turn the Control knob to select cell-phone
name, and then press the Control knob.
Input the PIN code
Operation type Operation
Select the numbers. Turn the Control knob.
Move to the next digit. Push the Control knob towards right.
Delete the last digit. Push the Control knob towards left.
Transmit the PIN code. Press the Control knob.
Pairing completes with “HF Connect” displayed.
⁄
• When any error code is displayed while the paring is in
progress, refer to <Troubleshooting guide> (page 54).