Filter
Top Products
48
|
KDC-BT51U/ KDC-5751SD/ KDC-5051U
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.
Enter Bluetooth mode
KDC-BT51U
Press the [ ] button.
KDC-5751SD KDC-5051U
Press the [LOG] button for at least 1 second.
“BT MODE” is displayed.
Enter Function setting mode
Press the Control knob for at least 1 second.
Select Phonebook name edit mode
The item can be selected and determined as
follows.
“Settings” > “Voice Tag” > “PB Name Edit”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
Search for the name to register
Turn the Control knob to select name, and then
press the Control knob.
If a voice tag has already been registered for a
name, “*” is displayed before the name.
Select a mode
Turn the Control knob.
Display Operation
“Register” Register a voice tag.
“Check”* Play a voice tag.
“Delete”* Delete a voice tag.
* Displayed only when a name for which a voice tag has
been registered is selected.
Selecting “Register” (Regist)
Register a voice tag (first)
Press the Control knob. When you hear a beep,
speak the voice tag within 2 seconds.
Confirm the voice tag (second)
Press the Control knob. When you hear a
beep, speak the same voice tag again within 2
seconds.
“Completed” is displayed.
Exit Function setting mode
Press the [ ] button for at least 1 second.
Return to step 2. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is displayed.
(Refer to <Troubleshooting guide> (page 54))
Pressing the Control knob allows you to retry voice input.
Selecting “Check” (Play)
Press the Control knob.
Play the registered voice and return to step 2.
Selecting “Delete” (Delete)
Delete a voice tag
Press the Control knob.
Turn the Control knob to select “YES”, and then
press the Control knob.
Exit Bluetooth mode
Press the [SRC] button.
Bluetooth setup
Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory)