Filter
Top Products
English
|
13
4 Make a setting
Turn the [VOL] knob and press it when the
desired item is displayed.
When select “AUTO MEMORY”:
Turn the [VOL] knob to select “YES”, and then
press the [VOL] knob.
When 6 stations that can be received are put in the
memory, auto memory entry closes.
5 Exit Function Setting mode
Press the [ ] button for at least 1 second.
⁄
• * This setting can be made when “TYPE NORMAL” is
selected for the “PRESET TYPE” of <Initial Setting> (page
20).
Function of remote control
Direct Access Tuning
Tuning in a desired radio station by entering the
frequency.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button.
“– – – –” is displayed.
2 Select Tuning item
Press the [DIRECT] button.
Pressing the [DIRECT] button each time switches
the tuning items as follows.
Items Display
Frequency “– – – –”
Channel “HD –”
Cancelling Direct Access Tuning —
3 Enter the frequency or Channel
Press the number buttons.
Example of frequency input:
Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
4 Tune in to the entered frequency
Press the [4] or [¢] button.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
iTunes Tagging
Using an iTunes Tagging enabled HD Radio receiver
you can tag your music. When you hear a song you
enjoy on your local HD Radio station, you only have
to press the [
] button. The song’s information will
then be saved on this unit. Up to 50 TAGs (song’s
information) can be registered to this unit. When
iPod is connected, the TAG information registered
to this unit is transferred to the connected iPod. The
saved songs will then show up in a playlist called
“Tagged” in iTunes the every next time you sync
your iPod to your computer. So then you just need
to click and then easily buy and download the song
you were tagging directly from the Apple iTunes
Music Store.
1 Enter HD Radio tagging mode
Press the [ ] button.
“
TAG
” will be indicated on the display when song
information can be registered.
⁄
• Turn “ON” the “TAGGING” of <HD Radio Setting> (page 12)
when using this function.
• The memory usage can be checked by selecting “TAG
MEMORY” of <HD Radio Setting> (page 12).