Filter
Top Products
20
|
KDC-BT645U/ KDC-HD545U
Other Functions
Clock Adjustment
1 Turn on this unit.
Press the [SRC] button.
2 Enter Function Setting mode
KDC-BT645U: Press the [VOL] knob for at least
1 second.
KDC-HD545U: Press the [VOL] knob.
“FUNCTION” is displayed.
3 Enter Clock adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “SETTINGS” > “CLOCK” > “CLOCK
ADJUST”.
The hour display blinks
4 Adjusting Clock
Turn the [VOL] knob to set the hours and press
it when to finish the hour adjusting.
The minute display blinks.
Turn the [VOL] knob to set the minutes and
press it when to finish the minute adjusting.
5 Exit Function Setting mode
Press the [ ] button for at least 1 second.
Demonstration Mode Setting
Turning the demonstration mode ON/OFF.
1 Enter Function Setting mode
KDC-BT645U: Press the [VOL] knob for at least
1 second.
KDC-HD545U: Press the [VOL] knob.
“FUNCTION” is displayed.
2 Select Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DEMO MODE”.
3 Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
4 Exit Function Setting mode
Press the [ ] button for at least 1 second.
Initial Setting
You can select following Initial Setting items.
1 Select the Standby source
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Function Setting mode
KDC-BT645U: Press the [VOL] knob for at least
1 second.
KDC-HD545U: Press the [VOL] knob.
“FUNCTION” is displayed.
3 Select the function item
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “INITIAL SET” > Function item.
Function item Selectable setting/item
“PRESET TYPE”
TYPE NORMAL:
1 station can be assigned to 1 preset button in each
of 4 bands (FM1, FM2, FM3, and AM), i.e., a total of
24 stations (6 stations x 4 bands) can be preset.
TYPE MIX:
A total of 6 stations can be assigned to a total of
6 preset buttons regardless of band (FM1, FM2,
FM3, and AM) and another Satellite Radio Tuner.
You can recall a preset station without switching
between bands.
“KEY BEEP”
Setting the operation check sound (beep sound)
on/off.
OFF/ON
“BUILT-IN AUX”
When this is set to ON, AUX source can be selected.
ON1: Outputs the sound of external unit connected
to the AUX terminal when switched to AUX
source.
ON2: Activates the attenuator function when
turning on the power with AUX source
selected. Cancel the attenuator function
by turning the volume knob clockwise
when listening to the audio of the external
equipment.
OFF: Disables the selection of AUX source. Set to
OFF when not using the AUX terminal.
“CD READ”
Sets the method for reading CD.
1: Automatically distinguishes between audio file
disc and music CD when playing disc.
2: Forces playing as music CD.
[SRC]
[VOL]
[
]
Release button