Filter
Top Products
English 23
Continued to next page
Selecting the Bluetooth Device
1 Press and hold the volume knob to enter
Bluetooth mode.
2 Turn the volume knob to select
[SETTINGS], then press to enter.
3 Turn the volume knob to select
[PAIRING], then press to enter.
4 Turn the volume knob to select [PHONE
SELECT] or [AUDIO SELECT], then press
to enter.
5 Turn the volume knob to select a
Bluetooth device name.
6 Press the volume knob to set up the
Bluetooth device.
■
“✱(Device name)”: The selected Bluetooth
device is busy.
■
“-(Device name)”: The selected Bluetooth
device is on standby.
■
“ (Device name)“: The Bluetooth device is
deselected.
■
If a cell-phone is already selected,
deselect it, and then select a different
one.
7 Hold to finish the procedure.
■
To exit Bluetooth mode, press SRC.
Setting a Voice Command
Registering Phone Book Name
1 Press and hold the volume knob to enter
Bluetooth mode.
2 Turn the volume knob to select
[SETTINGS], then press to enter.
3 Turn the volume knob to select [VOICE
TAG], then press to enter.
4 Turn the volume knob to select [PB
NAME EDIT], then press to enter.
5 Search for the Phone Book name to
register
Select the name to register with reference
to 5 in <Calling a Number in the Phone
Book> (page 19).
If a voice tag has already been registered
for a name, “*” is displayed before the
name.
6 Turn the volume knob to select [PB
NAME REG], then press to enter.
■
To select “PB NAME CHK”, play the
registered voice.
■
To select “PB NAME DEL”, delete a voice
tag. Turn the volume knob to select “YES”,
then press to confirm.
7 “ENTER 1” is displayed. When a beep is
heard, say a voice tag within 2 seconds.
8 “ENTER 2” is displayed. When a beep is
heard, say the same voice tag as that you
said in step 7 within 2 seconds.
“COMPLETE” is displayed.
9 Press the volume knob to return to step
5.
■
To exit Setting mode, press .
■
To exit Bluetooth mode, press SRC.
■
You can register up to 35 voice tags.
■
Audio sound is not output during voice tag
registration.
Registering Phone Book Name Type
1 Press and hold the volume knob to enter
Bluetooth mode.
2 Turn the volume knob to select
[SETTINGS], then press to enter.
3 Turn the volume knob to select [VOICE
TAG], then press to enter.
4 Turn the volume knob to select [PN TYPE
EDIT], then press to enter.
5 Turn the volume knob to select
[GENERAL], [HOME], [OFFICE], [MOBILE],
or [OTHER], then press to enter.
6 Turn the volume knob to select [PN TYPE
REG], then press to enter.
■
To select “PN TYPE CHK”, play the
registered voice.
■
To select “PN TYPE DEL”, delete a voice
tag. Turn the volume knob to select “YES”,
then press to confirm.
7 “ENTER 1” is displayed. When a beep is
heard, say a voice tag within 2 seconds.